Where Can I Buy a Stand for a Handheld Drill to Drill Holes With

Drill stands

A lack of infinite and/or a need for portability tin make a conventional drill press impractical. In that instance a drill stand up, a lighter more mobile tool with which you can employ a regular hand drill, tin can exist the answer. If you have already experimented with inexpensive drill stands, you lot will know that they at all-time merely reduce the margin of error when you need a directly pigsty. If you demand to do precise work, and a quality drill printing is out of the question, and then you should go for a good quality drill stand with a beefy steel column to ensure stability even when using larger drill bit diameters. It is also important to make sure the stand has enough drilling depth for your purposes.

Star-Thou drill stands

FAMAG drill stands

Duss precision drill stands

Star-M drill stand - max. hole depth 210 mm

Best for straight holes, center holes, dowel holes, drilling in rods and angled (pocket) holes. Can exist used with drills that come with a shank bore from 1.0 to 10 mm.
The drill chuck is driven past a 6.35mm hex shank and can be used with corded or cordless power drills, or even bear upon drivers.
Ideal for use on the structure site, for DIY or for smaller projects every bit the drill stand is light-weight and easy to acquit around.

• 10mm drill chuck (1.0-10 mm)
• maximum hole depth 210 mm
• maximum bending 45°
• material of the rods high carbon steel
• material of the base plate ABS
• recommended drill speed less than 3.000 rpm
• can be used with bear on commuter (non recommended to avoid habiliment and tear)
• recommended maximum diameter of drill chip 55 mm
• chuck central included
• weight 800 gr.

Video on YouTube

Code 323960 Price ^∗ € 89.ninety

Application examples:

• straight holes at 90°
• drilling in rods are easy due to the v-groove
• centered holes in squared timber using two lock pins
• drilling of angled holes, angle tin can exist adjusted stepless
• stepless adaptable depth stop for dowel holes or pocket holes

Star-Chiliad drill stand - pigsty depth 220 mm

Very well constructed drill stand to even get challenging projects done by using a cordless power drill.
The base comes in a special shape, offers great standing stability and a rubberized bottom.
Drilling angles can be adjusted stepless uo to 45°

• 13mm drill chuck (1.five-13 mm)
• maximum hole depth 210 mm
• maximum bending 45°
• material of the rods high carbon steel
• material of the base of operations and holder die-bandage aluminium
• recommended drill speed less than ii.500 rpm
• recommended tools electric ability drill, cordless drill )over xiv.4 V)
• chuck cardinal included
• weight 2400 gr.

Application examples:

• directly holes at 90°
• drilling in rods are easy due to the v-groove
• centered holes in squared timber using two lock pins
• drilling of angled holes, angle tin can be adjusted stepless
• stepless adjustable depth cease for dowel holes or pocket holes

Code 323961 Cost ^∗ € 199.ninety

Pictures of application examples and measurings:

Famag drilling jig – hole depth 210 mm

This drill stand from Famag with a round base and infinitely adaptable depth stop is designed to drill perfectly vertical holes in larger workpieces. All you have to do is mount your drill/commuter – for machines with 43 mm euro neckband.

Maximum length of bit 240 mm
Maximum hole depth 210 mm
Maximum hole diameter 75 mm
Internal dimensions of base ninety mm
External dimensions of base of operations 150 mm
Total length of jig 340 mm
Weight 2.i kg
Famag lawmaking 1405.210
5 mm Allen central included
Without return spring
Suitable Famag auger bits
Suitable Famag bradpoint drills
Suitable Famag Forstner bits

Code 324986 Toll ^∗ € 141.lx

Famag drilling jig – hole depth 320 mm

This drill stand up from Famag with a rectangular base of operations and infinitely adaptable depth stop is designed to drill perfectly vertical holes in larger workpieces. All you have to do is mountain your drill/commuter – for machines with 43 mm euro collar.

You lot can put your weight on the flat trapezoidal section to agree the drill stand down on the workpiece.

Maximum length of bit 350 mm
Maximum hole depth 320 mm
Maximum hole diameter 75 mm
Internal dimensions of base 140 ten 90 mm
External dimensions of base 250 10 150 mm
Full length of jig 465 mm
Weight 3.3 kg
Famag code 1405.320
5 mm Allen key included
Without return spring
Suitable Famag auger bits
Suitable Famag bradpoint drills
Suitable Famag Forstner bits

Code 324987 Price ^∗ € 202.60

Famag drilling jig with drill bushing plate, return bound and fixture – depth 190 mm

This drill stand up from Famag with a rectangular base and infinitely adjustable depth stop is designed to drill perfectly vertical holes in larger workpieces. All you take to do is mount your drill/driver – for machines with 43 mm euro collar.

You can put your weight on the flat trapezoidal section to hold the drill stand downwardly on the workpiece.

This jig is especially useful when using drill bits with a large diameter.

The return spring returns the drill/driver to the starting position. The bushing plate simply above the base has holes for 8, 10, 12, xiv, 16, eighteen, 20, 22, 24 and 26 mm drill bits and provides dependable guidance for drill bits. Drill flake wander – always a risk with manus-guided drill/drivers – is reliably prevented. The supplied 4-part clamping fixture ensures authentic positioning of holes in beams and squared timber.

Maximum length of bit 320 mm
Maximum hole depth 190 mm
Drill bushing plate for apply with drill bit sizes 8, 10, 12, 14, xvi, 18, 20, 22, 24 and 26 mm
Internal dimensions of base 140 x 90 mm
External dimensions of base 250 10 150 mm
Total length of jig 465 mm
Maximum clamping width 90 mm
Weight 5.8 kg
Famag code 1403.322
5 mm Allen central included
With stainless return springs
With drill bushing plate
With clamping elements
Suitable Famag auger bits
Suitable Famag bradpoint drills

Code 324990 Price ^∗ € 345.twenty

Famag drilling jig with drill bushing plate, return jump and fixture – hole depth 310 mm

This drill stand from Famag with a rectangular base and infinitely adaptable depth terminate is designed to drill perfectly vertical holes in larger workpieces. All you have to do is mountain your drill/driver – for machines with 43 mm euro collar.

You can put your weight on the flat trapezoidal section to hold the drill stand up down on the workpiece.

This jig is especially useful when using drill bits with a large diameter.

The return spring returns the drill/driver to the starting position. The bushing plate just above the base has holes for eight, 10, 12, xiv, 16, eighteen, 20, 22, 24 and 26 mm drill bits and provides dependable guidance for drill bits. Drill bit wander – always a adventure with hand-guided drill/drivers – is reliably prevented. The supplied 4-part clamping fixture ensures accurate positioning of holes in beams and squared timber.

Maximum length of bit 460 mm
Maximum hole depth 310 mm
Drill bushing plate for use with drill chip sizes 8, ten, 12, 14, 16, 18, 20, 22, 24 und 26 mm
Internal dimensions of base 140 10 90 mm
External dimensions of base 250 x 150 mm
Full length of jig 605 mm
Weight 6.7 kg
Famag lawmaking 1403.462
v mm Allen cardinal included
With stainless return springs
With drill bushing plate
With clamping elements
Suitable Famag auger bits

Lawmaking 324991 Price ^∗ € 355.thirty

Famag pivoting drilling jig with drill bushing plate, return spring and fixture

This drill stand from Famag with a rectangular base and infinitely adjustable depth stop is designed to drill holes at a selected bending in larger workpieces. All you have to practice is mountain your drill/driver – for machines with 43 mm euro collar.

Y'all tin can put your weight on the flat trapezoidal department to hold the drill stand downwardly on the workpiece.

This jig is especially useful when using drill bits with a big diameter.

The return spring returns the drill/driver to the starting position. The bushing plate just above the base has holes for viii, 10, 12, 14, 16, 18, twenty, 22, 24 and 26 mm drill bits and provides undecayed guidance for drill bits. Drill bit wander – always a risk with hand-guided drill/drivers – is reliably prevented. The supplied iv-office clamping fixture ensures authentic positioning of holes in beams and squared timber.

Internal dimensions of base 140 x ninety mm
External dimensions of base 250 x 150 mm
With clamping elements for timber up to ninety mm wide
5 mm Allen key included
With stainless return springs
With drill bushing plate
Suitable Famag auger bits
Jig shown here no. 324993

Famag pivoting drilling jig – pigsty depth 160 mm

Maximum length of drill bit 320 mm
Maximum pigsty depth 160 mm
Weight vi.7 kg
Famag code 1404.322
Total length of jig 490 mm

Code 324993 Price ^∗ € 447.00

Famag pivoting drilling jig – pigsty depth 250 mm

Maximum length of chip 460 mm
Maximum hole depth 250 mm
Weight 7.2 kg
Famag lawmaking 1404.462
Total length of jig 630 mm

Code 324994 Price ^∗ € 457.10

Duss precision drill stand KB 43

This auto weighs 15 kg and that tells almost of the story. This is one substantial and solid tool. The table and armature are made of cast fe, the columns in steel. The moving parts run smoothly and at that place is no accuracy-destroying play in their movement. A 17 mm wrench is supplied with the unit to attach and adapt the elevation of the drill. Manufactured in Frg, the Duss stand has a 43 mm euro collar.

To fix a automobile vise we recommend these 10 mm T-nuts with spiral (300556, 300557)

Enlargement - correct side
Enlargement - left side
Detail
Precision drill stand up with hand drill

Drilling depth 120 mm or 180 mm

Rotating the drilling head around on the column, precise holes can be drilled in large objects, round bench dog holes in a piece of work demote, for instance.

The pressure needed to apply the stand up tin can also be steplessly adjusted from light to heavy using a knurled thumb screw.
Maximum distance between table and drilling caput 260 mm
Column height 410 mm resp. 470 mm
Cavalcade diameter 40 mm
Max drilling reach 170 mm (measured from center of column to center of drill flake)
Baseplate 200 x 300 mm
Work vice 150 ten 150 mm
Rail width 11.5 mm
Track depth 18.5 mm
Rails width bottom (T area) 17.5 mm
Rails height lesser (T expanse) 9.v mm
Weight fifteen kg

Duss precision drill stand KB 43 drilling depth 120 mm

Moving picture left

Code 300600 Toll ^∗ € 497.90

Duss precision drill stand up KB 43 drilling depth 180 mm

Picture

Lawmaking 300601 Cost ^∗ € 650.60

What? And then much coin for a drill stand? For that much coin, I could buy a drill press. That is right, and you should buy a drill press if yous have the space for a stationary table and do not need the flexibility offered by a Duss drill stand. These tiptop-quality drill stands are made for people who need the flexibility and mobility that they provide and the precision and quality of work, equal to that of a good-quality drill press. Ownership a drill press capable of producing the precision available from the Duss stand might non salvage you whatsoever money in the cease, and ownership a less sturdy tool could be worse than useless, because if there is whatsoever play in the works, it will frequently not exist used. It is no exaggeration to say that the Duss is the best drill stand currently available worldwide.

barberbeffers72.blogspot.com

Source: https://www.fine-tools.com/bohrstaender.html

Share this post